290-6209 - Wilwood Engineering Brake Fluid

This part should fit your vehicle. It is a universal part.

Images May Not be Vehicle Specific. For Display Purposes Only.

Images Of This Specific Part Number

Non-Specific Images

Place Order Here

Part #: 290-6209
Notes: EXP 600 Plus Racing Brake Fluid
MSRP: $20.25
Your Price: $18.75


Size 500ml Bottle

This Item Also Available In

Part Number Price Notes & Specs
290-2210 $49.96 Notes 570 Brake Fluid
Size Case of 6, 12oz Bottle
290-6210 $366.32 Notes EXP 600 Plus Racing Brake Fluid
Size Case of 20, 500ml Bottle
290-0633 $159.65 Notes 570 Brake Fluid
Size Case of 24, 12oz Bottle
290-11084 $12.99 Notes Wilwood 5 Silicone Fluiid
Size 12oz Bottle
290-11085 $77.95 Notes Wilwood 5 Silicone Fluiid
Size Case of 6, 12oz Bottle
290-8478 $110.07 Notes EXP 600 Plus Racing Brake Fluid
Size Case of 6, 500ml Bottle
290-0632 $9.96 Notes 570 Brake Fluid
Size 12oz Bottle
290-12983 $299.96 Notes Brake Fluid & Assembly Lube P.O.P. Display

All Fitments

Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes

Product Description

EXP600 PLUS Brake Fluid
EXP 600 Plus is a highly refined blend developed for extreme performance under the high heat and extreme pressure of professional motorsports.EXP 600 Plus has tested to 626 degrees Fahrenheit with a wet boiling point of 417 degrees Fahrenheit. These numbers far exceed any DOT or SAE specifications.

It is true that racing fluids need to have high boiling points. It is also true that fluids need to have low moisture affinity to slow the natural absorption rate of water vapor. But the true test of any fluid is how well it resists aeration and compressibility after it has been heated and pressure cycled a few hundred times. The real test is at the track. EXP has been proven to maintain firm pedal feel and quick response, long after others have failed.

HI-TEMP Brake Fluid
Wilwood’s specially formulated Hi-Temp° 570 Racing Brake Fluid has a minimum 570° F. dry boiling point of to withstand the severe heat requirements of automotive racing. Hi-Temp° 570’s low viscosity allows easy bleeding of your brake system, eliminating aeration of the brake fluid caused by foaming due to excessive pumping of the pedal.

Hi-Temp° 570 comes in convenient 12 ounce containers hermetically sealed to guarantee against unwanted absorption of moisture which can drastically lower the fluids boiling point (fluid from larger containers tends to become contaminated with moisture, lowering its boiling point and making it unsuitable for racing applications.

Wilwood Five Brake Fluid
Wilwood FIVE is a highly refined silicone brake fluid, formulated to preserve the looks and reliability on classic vehicles and show cars. Its non-hygroscopic blend blocks moisture absorption to inhibit internal system corrosion. It is paint friendly and will not harm most custom finishes should a spill or leak occur.

Wilwood FIVE provides superior lubrication for all brake system wear surfaces with long life from the master cylinder and caliper pistons, bores, and seals. It is a fully DOT 5 compliant fluid meeting or exceeding FMVSS 116 and MIL-PRF-46176B-DOT specifications, and can be used in any vehicle that is OE specified for DOT 5 use. Wilwood does not recommend using DOT 5 fluid in any racing applications.

Assembly Lube Description
Wilwood’s specially formulated Synthetic Assembly Lubricant is designed to be used on pistons and rubber components when overhauling brake calipers, wheel cylinders and master cylinders for maximum protection and performance.

Comes in a convienient 4oz bottle size, with applicator tip. Also available in a case of 12 – 4oz bottles.